The ACSOON ACF400M-330030 is a cabinet-mounted 400 Hz AC power supply with a front touchscreen. The unit shown converts three-phase 380 V, 50/60 Hz mains into three-phase 115 V line-to-neutral, 400 Hz AC. The model is rated at 30 kVA for equipment that requires a 400 Hz supply.
The touchscreen sits behind a clear hinged cover. A separate emergency-stop button is on the front door. The cabinet photos show the panel with the cover open and the rear ventilation grille. If your team needs specific screen functions or remote control, include those requirements with the enquiry.
Electrical values below are from the nameplate of the photographed ACF400M-330030.
| Rated capacity | 30 kVA |
|---|---|
| Input | Three-phase AC, 380 V ±15% (L–L), 50/60 Hz, 57 A |
| Output | Three-phase AC, 115 V (L–N), 400 Hz, 83.3 A |
| Operator panel | Front touchscreen with hinged cover and separate emergency-stop button |
Does this model take 50 Hz or 60 Hz input?
The photographed configuration is rated for 50/60 Hz three-phase input at 380 V L–L ±15%. Send the actual site supply when requesting a quote.
Is 115 V measured line-to-line?
The nameplate specifies 115 V line-to-neutral (L–N) on the three-phase output. Provide your load's voltage convention and wiring requirements so the output configuration can be matched.
Can I order a different output frequency or enclosure rating?
The photographed unit is marked 400 Hz. The ACF400M series specification lists configurable frequency ranges and enclosure options. Confirm the required range and operating environment for the ordered build.
What should I send to check load compatibility?
Include the equipment nameplate, continuous and starting current, starting duration, and the connection or connector required. For a multi-load bench, include which loads run or start together.
Share the site supply, required output, load nameplate and installation requirements. If you need a remote interface, include the protocol and functions you want to use.